PowerBox-Systems - BASELOG - CENTRALINA CON INTERRUTTORE - PER IL CONTROLLO DI DUE BATTERIE PER UNA DOPPIA SICUREZZA (indicato per 2 batterie LiPo da 2 celle o due batterie da 4~5 celle NiCd - NiMh)

BASELOG CENTRALINA POWER BOX CON INTERRUTTORE - PER IL  CONTROLLO DI DUE BATTERIE PER UNA DOPPIA SICUREZZA (indicato per 2 batterie LiPo da 2 celle o due batterie da 4~5 celle NiCd - NiMh)

How much flight time do you have left on your batteries?
Simply check voltage, capacity and critical data with the new PowerBox-System BaseLog!

The small lightweight BaseLog is a major advancement in on-board battery management.
Protect your investment with critical data displays.
Here’s how it works:

Features:

• Dual regulated output voltage
• User-selectable output voltage of 5.9 V or 7.4 V, software-variable using the SensorSwitch
• Informative graphic OLED screen with a resolution of 128 x 64 pixels
• Facility for connecting MPX and Spektrum downlink bus systems
• Direct transmission of both batteries' voltage and capacity to the transmitter
• Voltage display for each battery
• Residual capacity display for both batteries
• Minimum value memory for both batteries
• Large heat-sink area for high regulator performance
• Supports all currently used battery types: LiPo, NiMH / NiCd, LiFePo
• Suppression of possible servo feedback currents
• Various patch-leads (MPX / JR / Futaba, MPX / MPX) available, allowing the use of all receiver types

Specifications:

• Operating voltage: 4.0 Volt to 9.0 Volt
• Power supply:
  2 x 2-cell LiPo battery, 7.4 Volt,
  2 x 5-cell NiCd or NiMH batteries,
  2 x 2-cell LiFePo battery (A123)
• Current drain:
  Switched on: approx. 85 mA
  Switched off: approx. 10 µA
• Dropout voltage: approx. 0.25 V
• Max. receiver and 2 x 10 A (stabilised), according to cooling measures
• Servo / receiver current:
  Peak 2 x 20 A
• OLED screen resolution: 128x64 pixels
• Bus systems: Spektrum, Multiplex
• Temperature range: -30°C to +75°C
• Dimensions:
  93 x 67 x 19 mm (incl. base plate)
• Weight: 88 g
• SensorSwitch: 15 g
• EMV approval: EN 55014-1:2006
• CE approval: 2004/108/EG
• Registered design: DE 203 13 420.6

This battery backer fulfils the EMV protective requirements, EN 55014-1:2006 with certificate dated 16 January 2010. EMC approval 2004/108/EG.