CDI TESTER - CIRCUITO ELETTRONICO TESTER PER CENTRALINE "RCexl ignition"

CDI TESTER - CIRCUITO ELETTRONICO TESTER PER CENTRALINE "RCexl ignition"

This device reproduces the signals from the Hall sensor of DLE gasoline engines andﾠforward to CDI ignition module.
Thus, it becomes possible to test the DLE engine ignition without running the engine.
With a wheel, it is possible to vary the number of pulses (number of sparks to the plug) to simulate various RPM from 400 to 20000 RPM.
Ideal to conduct safe tests to check the ignition system or to check the range of the radio as the receiver can be affected by radio noise (interference), etc.

Specifications:
Power supply: 4.8 to 6.2 V (battery pack for ignition)
Adjustable speed range: 400-20 000 RPM
Dimensions: 21.5 x16. 0mm approx
Weight: 2.0 grams approx.

Wiring:

SAFETY PRECAUTIONS!

This tester will create a spark on the spark plug, and if it is still mounted on the engine, any fuel vapor still inside the engine can ignite and turn the propeller and / or cause a flame / produce heat at the exhaust port.

ESPECIALLY DO NOT TOUCH THE PLUG when it works, or you would receive an electric shock! Caution! May cause electric shock or fire! High-voltage ignition cable, plug cap... During use, please be careful to avoid electric shock!

Please, do not use next to flammable materials. High-voltage pulse (spark) > ignition of combustible materials - there is a fire hazard!

Note that this system is suitable for the CDI unit comes with DLE engines.
Use of this tester with other ignition modules may not function properly and even damage the ignition!