PowerBox-Systems - COMPETITION - CENTRALINA CON INTERRUTTORE

PowerBox Competition

Features:

• High resolution graphical OLED screen with 128x64 pixels
• Programming procedure using the SensorSwitch in conjunction with the OLED screen
• Signal amplification for a total of 12 channels and 18 servos
• 4 match channels with 2 servos for each channel
• Double regulated output voltage
• Energy consumption, voltage- and residual capacity display in mAh for both batteries
• Sockets for telemetry bus systems
  Multiplex MSB and Spektrum
• Data feedback by downlink - i.e. for data such as voltage, consumption and residual capacity for both batteries
• Selectable servo voltage of 5,9V or 7,4V
• Minimum value memory displays voltage collapses in flight
• Large area heat-sink area for heat dissipation and even higher performance
• Supports three battery types: NiMh/NiCd, LiFePo
• Suppression of servo feedback currents

Specification:

• Operating voltage: 4,0 Volts to 9,0 Volts
• Power source:
  2 x two-cell LiPO batteries 7,4 Volts
  2 x five-cell NiCd or. NiMH batteries
  2 x two-cell LiFePo batteries 6,6 Volts (A123)
• Current drain:
  Power-on state approx. 130 mA
  Power-off state approx. 15 ﾵA
• Dropout voltage: approx. 0,25 V
• Max. receiver- and servocurrent:
  2 x 10 A (stabilised), according to efficiency of cooling
  Peak 2 x 20 A
• Servo signal resolution: 0,5ﾵs
• Signal frame rate:
  User variable: 9ms, 12ms, 15ms, 18ms, 21ms
• Screen: OLED 128 x 64 pixels, graphic
• Bus systems: Spektrum, Multiplex
• Servo sockets: 18 sockets, 12 channels,
  4 of them match-channels
• Temperature range: - 30 ﾰC to + 75 ﾰC
• Dimensions: 110 x 72 x 24 mm
  (incl. base plate)
• Weight: 115 g
• SensorSwitch: 15 g
• EMV approval: EN 55014-1:2006
• CE approval: 2004/108/EG